Gas Hot Water Boiler For Hospital

Gas Hot Water Boiler For Hospital

By the end of 2016, the State Council issued separately "" Thirteen Five "environmental protection plan" and "" Thirteen Five "energy-saving and environmental protection industry development plan", environmental planning and environmental protection industry to make guidance. During the two sessions this year, environmental protection is also a hot topic. Policy of continuous progress, and constantly increase investment in environmental protection efforts, more and more industries engaged in environmental construction. In the pharmaceutical industry, pharmaceutical equipment associated with its environmental protection has also been vigorously sought after by the market, the drug manufacturing must seize the favorable policies, increase research and development of energy-saving, environmental protection, pharmaceutical equipment.

In the pharmaceutical industry, industrial steam and pure steam is essential production conditions, mainly heating and apparatus for sterilizing products. The main steam from natural gas and other fuels to generate heat in the boiler, and the boiler consumes a lot of fuel per year. Currently, many enterprises will be condensed water vapor produced direct emissions, which not only pollutes the environment, but also lost a lot of heat and precious water resources. If we can be recycled, either generate economic benefits, can also protect the environment.

For a long time, boiler manufacturing industry has been committed to upgrading boiler welding technology to improve the level of boiler manufacturing technology, especially in recent years, domestic production of boiler equipment companies are active in technological innovation, and the introduction of new equipment, new technology to promote advanced welding to accommodate boiler capacity, and the parameter variations furnace, boiler meet the complex structure of the new materials and the welding member boiler.

Experts said boiler technology has made some progress, but the low efficiency of industry resources are distributed, disorderly market competition, product less competitive and other issues also plagued the entire boiler industry. Boiler welding technology, while progress has been made, but the level of automation of welding part of the product to be improved, welders welding quality is good or bad is still dependent on the technical level.

Market demand, the major boiler manufacturers are actively cooperate with professional welding equipment manufacturers to develop new welding equipment and welding technology. In recent years, China's major boiler plant are actively carry out technical transformation, the introduction of new technology and new equipment, and actively implement new advanced welding technology, adapt to changes in the parameters of boiler capacity and the furnace, boiler and boiler components to meet the complex manufacture of new materials requirements.

Insiders said that in terms of stabilizing the economy and achieve long-term sustainable development, energy saving and environmental protection industry is an important force. After the new GMP implementation on some equipment and production conditions put forward higher requirements, how to meet the production requirements of the premise, as far as possible to reduce energy consumption, which has become a headache problem of large pharmaceutical companies. Use energy boiler system is an effective way in the pharmaceutical industry to achieve energy saving, reduction of pollutant emissions fog.

Changing and blessing, natural gas fuel development and application of national energy saving policy of energy supply system will enter a period of rapid development, coal-fired industrial boilers will gradually withdraw from the center of town. Launched around the "coal to gas" and other policies is to verify this fact. In the context of social development, boiler manufacturing industry must adhere to market-oriented strategy to develop science and technology as a weapon boiler, under the guidance of relevant national policies, enterprise architecture and product structure adjustment, to obtain long-term survival and future development.

Daily maintenance of gas-fired boilerDuring operation, the gas-fired boiler should pay attention to the following points: (1) the gas-fired boiler does not allow positive pressure combustion or smoke injection in the furnace because it is easy to burn out the coal hole cover. (2) the bottom floor plane of the gas-fired boiler shall not be watered up in order to prevent damp corrosion. The gas-fired boiler shall be inspected every 2 weeks and every 3 months after the operation of the gas-fired boiler. (1) the gas-fired boiler shall be inspected and repaired in an all-round way after the operation of the gas-fired boiler every 3 months. (1) the gas-fired boiler shall be inspected inside and outside the boiler. If the pressed part of the weld, steel plate inside and outside corrosion phenomenon, if found in serious defects should be repaired in time, if the defects are not serious, the next time the furnace shut down repair, if found When suspicious, but does not affect the safety of production, records shall be made for future reference. (2) after inspection, boiler primer may be applied on the surface to prevent corrosion. 4. Gas-fired boilers and boiler base shall be painted at least once a year. 5, There are dry and wet methods for the maintenance of gas-fired boilers: dry method and wet method. Dry maintenance method should be adopted when the boiler is shut down for more than one month. (1) dry maintenance method: after boiler shut-down, the boiler can remove the water from the furnace, and the method of dry maintenance shall be adopted under one month. (1) dry maintenance method: after the boiler has shut down the furnace, Thoroughly remove the internal dirt, rinse clean, dry the furnace with a slight fire (be careful not to fire), and then apply a 10-30 mm diameter lump of quicklime. The plates are arranged and placed in the pan, without contact with the metal. The weight of quicklime is calculated at the volume of 8 kilograms per cubic metre of the drum, and then all manholes, hand-holes, pipe valves are closed and checked every three months. If the quicklime is broken, it needs to be replaced immediately. When the boiler is re-running, the quick lime and the tray shall be removed. (2) Wet maintenance method: after the boiler has stopped the furnace, the boiler shall discharge the furnace water, thoroughly remove the internal dirt, rinse it clean, and reinject the treated water until it is fully filled. Heat the furnace water to 100 ℃, let the gas from the water out of the furnace, and then close all the valves, where the climate is cold, do not adopt moisturizing method, so as to avoid the furnace water Icing damaged the boiler.

9 major technical characteristics of the gas hot water boiler for hospital you know? 1, according to atmospheric boiler design, boiler in a non-pressure state, there is no safety hazard. 2, the use of advanced multi-layer insulation centrifugal glass wool, steel for packaging famous white color, heat loss, anti-rust appearance 3, burner configuration imported brands, high degree of automation, automatic purge controller according to the instruction, the electronic auto-ignition, automatic combustion (gas) automatically adjusting the ratio of wind oil, security and stability performance, good combustion. And there are flameout protection device, ensure safe operation. 4, the computer controller hot water boiler, all the functions are stored on a magic smart chip, a key to power boilers, automatic timing, temperature operation, the user can set the start, shutdown time, after setting, without special duty, save time, and effort. 5, the inner fire tube inserted spoiler retardant, smoke slow speed, to strengthen the heat exchanger, the temperature of the flue gas discharged from a low smoke chamber, reducing heat loss and save fuel. 6, large font display temperature, easy to grasp and boiler operating conditions of the system, the water temperature can be freely set from 10 ℃ to 90 ℃, automatic boiler or heating system to provide users with life, bath with hot water. 7, the control system in accordance with the temperature control of boiler water circulation pump start and stop, boiler water circulating pump starts when the water reaches an upper limit temperature, lower than the hot water circulation pump stops when the water temperature lower limit. 8, horizontal fuel gas hot water boiler three return all wet back structure, using a large furnace, rough smoke tube design, increased furnace radiation heat absorption, the effective energy saving. Using threaded pipe and waveform furnace, greatly enhanced heat transfer effect, greatly saving fuel consumption. 9, while the machine is equipped with thermal protection (ultrahigh temperature furnace, the burner is automatically stopped and an alarm buzzer, the second over protection (the boiler shell temperature exceeds 105 deg.] C, the secondary circuit is automatically cut off), the lack of anti-dry protection of water (when water is lower than the low water level of the furnace, the boiler is stopped and an alarm beep), a boiler leakage protection (the control system detects electrical leakage, short circuit, automatically cut off the power).

Impact of hot water boiler for hospital energy consumption indicators of a number of things because China has been working to coal to gas roaring blaze of glory, the choice of hot water boiler, a very large reduction of dust contamination, together with nitric oxide and other gases affect health the smoke get suppressed. Energy consumption index is an important measure of labeled water boiler, behind a number of things we look at the impact of energy consumption indicators due to hot water boiler. After study of the persons concerned, and hot water boilers consume more important comes from two places: the ideal ratio is not sufficient combustion air flue gas emissions as well as waste heat. Reduce flue gas emissions can be equipped with a waste heat chimney latent heat recovery equipment in the tail of hot water boiler, or choose a more leading boiler system FGR. The combustion air is not fully over the inappropriate induction ratio: usually hot water boiler combustion machine ejector, formed air-fuel ratio can not be automatically scheduled. A majority of the hot water boiler using a mechanical blower burner, causing the air-fuel ratio is not ideal because there is something behind several aspects: air-fuel ratio is not ideal for the more important can be divided into two conditions: when too much air, there will be a large number of excessive cold air is heated, resulting in improving the energy consumption of hot water boilers, hot water boiler energy consumption index dropped; when there is insufficient air, to produce incomplete combustion conditions, hot water boiler energy consumption indicators declined.

Free Chat

About Us

Contact Us