Oil-fired 1000kg boiler room fire safety standards and is available from the reference oil: oil-fired boiler, which is a boiler, and, for us, is the need to know and understand the specific species. Because, not only for the website products, but still more common and commonly used. So, based on this, then, we will learn of its work, in order to let everyone through study, this A boiler has a comprehensive knowledge and understanding, and not know about it yet. 1. oil-fired boiler and gas boiler, which one is better? Oil-fired boilers and gas boilers, boiler compare these two, then, can not say which one is better, because they have advantages and disadvantages, and the corresponding range of applications, therefore, can not be compared. Moreover, the use of which one can only say that more appropriate in either case.
Pressure maintenance, 1000kg boiler pressure exceeds the rating linkage Maintenance: Measures is shutdown, the combustion system to stop working; also be changed fire mouth, single-stage or two-stage combustion, also conditioning oil, then the buck, to ensure the safety of boiler operation. Pressure manipulator: Usually manipulator with two pressure, the pressure signal converted to an electric signal electromechanical conversion device, its function will be the high pressure or low levels of signal to the electrical switch, external circuits actively control or chain protection. Safety valve: safety valve is the last line of defense in maintaining the boiler, when the boiler pressure exceeds the limit, according to the set pressure relief valve design feature, the exhaust pressure relief, to ensure the normal operation of the boiler.
Acceptance of low nitrogen renovation project management approach gas-fired 1000kg boilers in order to successfully carry out the transformation of the company low-nitrogen, low nitrogen transformation and acceptance process will now be regulated in response to acceptance of work under different circumstances, thus does not affect the progress of the company's overall transformation of low-nitrogen, It is organized as follows. The company low-nitrogen transformation acceptance criteria refer to "Beijing Gas (oil) boiler low nitrogen transformation Yijiangdaibu fund management approach" in low-nitrogen transformation acceptance requirements, low nitrogen transformation of the company and the manufacturers signed contracts for acceptance, and a phased acceptance carried out the way, it is divided into the following four stages: prior to acceptance confirmation from the manufacturer, pre-acceptance, government low nitrogen transformation and acceptance, final completion and acceptance. First, the low nitrogen gas boiler renovation project before pre-acceptance confirmation from the manufacturer to achieve the requirements of the contract 1. The actual standard for this type of project, the next step is direct acceptance process. 2. The actual contract can not reach the required standard (manufacturers to lower the acceptance criteria) for such projects, communication with the manufacturers of xx, re-sign a supplementary agreement or contract, according to a new contract or acceptance protocol standards. 3. The actual contract not up to the required standard (manufacturers do not agree or do not allow the government to reduce the acceptance criteria) for such projects, communication by the xx with the manufacturers, to terminate the contract, non-acceptance. Second, a low nitrogen gas boiler renovation project pre-acceptance satisfy items (1 projects above) pre-acceptance required to start the pre-acceptance operates in the following claims. 1.xx after the company confirmed that manufacturers have reached the standard contract, the company launched an internal pre-acceptance, and notify the relevant Division, Center for Technology Management, Operations Management Center attended. 2. Pre-acceptance of the project can be divided into environmental inspection and acceptance of two parts, the project must meet the acceptance requirements of environmental protection (standards and materials), to enter the next "low nitrogen transformation of government acceptance" stage. Unqualified acceptance content, fill out the on-site rectification notice, rectification, manufacturers, construction units, divisions, technical, operational and other relevant units to sign it by the deadline. 3. If the project environmental impact there is acceptance, boiler and other major security issues, not by pre-acceptance; In addition, pre-acceptance by the environmental protection, engineering, pre-acceptance deadline for correction. 4. In response to these contents rectification notice, by the manufacturer or xx arrange the construction unit to develop corrective plan submitted to the relevant divisions, technical, operational management center knows, in order to determine the final acceptance plan. Third, the low nitrogen gas boiler renovation project government low-nitrogen transformation project through the pre-acceptance and acceptance of environmental protection, and acceptance by the Government Division organized low-nitrogen transformation inspection department, relevant content is organized as follows. 1. A low nitrogen acceptance by the division of the transformation EPA invited, and notifies the acceptance time OA xx, center management technology, operation and management center. 2. The notification by the equipment manufacturers xx company to deal with the EPA project acceptance. 3. Technology Management Center, operation and management center according to the situation, coordination, cooperation division of the Environmental Protection Agency to complete the inspection. 4. acceptance by EPA, proceed to "completion and acceptance of the final" stage. 5. If the EPA does not pass inspection, subject to the opinion of the EPA, the Environmental Protection Agency if given a second chance acceptance, arrange for rectification by the Environmental Protection Agency xx grasp, and to give the exact time of commissioning compliance, and older than the Environmental Protection Agency to give the second acceptance time more than 3 days; EPA if not given a second chance of acceptance, the acceptance consequences borne by the manufacturer and by the execution of the contract with reference to the subsequent procedure. Fourth, low nitrogen gas boiler renovation project completed after final completion and acceptance 1. EPA acceptance, notify the manufacturer xx by the company, the construction unit to start the rectification work. Factory or construction unit for rectification according to plan in accordance with the rectification notice requirements. 2. The respective divisions, technical management center, operation and management of the center to collaborate rectification work, with supervision. 3. After the completion of the rectification project, organized by the xx-related divisions, technical management center, operation and management center participate, final completion and acceptance, to complete the transfer.
Winter is the peak heating heating, but also prone to accidents of special equipment such as 1000kg boilers. To effectively prevent and curb the occurrence of accidents, equipment thorough investigation to eliminate safety hazards, Hunan Province to carry out safety hazards investigation work in the province within the boiler, boiler equipment and punishes the security measures are not in place.
Yueyang City bearing the brunt of the provincial government in response to the call for in food, pharmaceutical processing industry, boiler equipment, pressure vessels, pipelines, etc. investigation and remediation, further investigation and security risks, strengthen supervision, which ensures safe operation of special equipment.
Zhuzhou City, the relevant departments to implement the special equipment safety responsibility, collective interviews conducted meetings, some special equipment overdue inspection or rectification in place of business risks not to be interviewed. In order to urge them to get inspection reports in order to restore operation, to ensure the safe use of special equipment. But also warned of these enterprises, if not through legal regular inspections, not only safety and production are not effectively protected, will be severely punished.Free Chat
Copyright © 2020.Company name All rights reserved.