8 Ton Horizontal Gas Boiler

8 Ton Horizontal Gas Boiler

Gas oil furnace questions and how horizontal pumping: conducting oil furnace oil furnace gas, which is below the learning object, because it is one of the website products, but also one of the sites keywords, therefore, It is necessary to carry out, otherwise, would not fully understanding all 8 ton horizontal boiler products website. Furthermore, we will also learn obstruction, resulting in adverse effects. 1. Gas conducting oil furnace, what role oil heater? In addition, it is necessary to configure whether the waste heat recovery? Gas oil furnace, the oil heater, which is mainly used for the thermal oil is heated, so it is called oil heater. And, using the electric tube flange. As for whether to configure a gas oil furnace heat recovery unit, is mainly the specific circumstances, if necessary, should have the means, for recycling waste heat, to avoid waste.

The difference of fuel between Oil-fired Boiler and Gas-fired BoilerOil-fired 8 ton horizontal boiler refers to the fuel-fired boiler, including diesel oil, waste oil and other oil boilers. The overall arrangement of the oil-fired boiler is similar to that of the coal-fired boiler, except that the bottom of the furnace of the oil-fired boiler is mostly made into the bottom of the insulation furnace with a tilt to the back wall of 10 °~ 30 °, in order to obtain good combustion characteristics. In order to atomize fuel oil, there are two types of fuel burner nozzle: mechanical centrifugal injector and steam atomized Y type injector. The fuel of the oil-fired boiler is the fuel (such as diesel oil, kerosene, etc.). The fuel of the gas-fired boiler is gas (such as natural gas, city gas, biogas, etc.), depending on what fuel the boiler burns. The difference between a fuel-fired boiler and a gas-fired boiler is what kind of fuel burners are used to burn the gas-fired boilers, which are called gas-fired boilers, oil-fired boilers with fuel-fired burners, and oil-fired boilers called oil-fired boilers.

10th June this year, the provincial government agrees that the ecological environment in Zhejiang Province Office issued the "Notice on the implementation of special emission limits national emission standards of air pollutants" (hereinafter referred to as "notice"), marking the full implementation of Zhejiang Province especially national emission limits of air pollutants.

"Special emission limits" is mainly for land development density is already high, the environment carrying capacity began to weaken, or less atmospheric environmental capacity, ecological environment is fragile, more stringent prone to serious air pollution problems in sensitive areas and set the emission limits. Implementation of the national emission standards for special emission limits, Zhejiang Province in favor of further strict pollution management, reduce pollutant emissions, to further improve air quality, but also help promote the integration of the Yangtze River Delta environmental standards.

In fact, back in 2013, Zhejiang has already begun in some areas particularly the implementation of the national emission standards limit emissions of air pollutants, but was limited to Hangzhou, Ningbo, Huzhou, Jiaxing and Shaoxing, Hangzhou Bay five cities; and this is to expand to the province level. In addition to a wider geographical range, "advertisement" clearer pollutant emissions targets, e.g., volatile organic contaminants not individual indicators, including not only non-methane hydrocarbons, total volatile organic compounds such as benzene, benzene and other pollutants indicators meet the definition of volatile organic compounds should be performed; also more involved in the industry, such as boilers only provides original coal-fired boiler, and "notice" it covers all types of boilers (including oil, gas).

It is reported that, in the national emission standards have been implemented, a total of 25 standards set emission limits of air pollutants in particular; at the same time, the recent ecological Ministry of Environment and the State Administration of market regulation has released three national emission standards of air pollutants, namely, pharmaceuticals, paints, inks and adhesives and volatile organic compounds fugitive emission control standards, and will be from July 1, 2019 implementation. According to "notice" requirement, the province is also involved in the enterprise should implement special emission limits specified in the three standards, the execution time of the emission standards time synchronization. Provincial Department of Atmospheric environment Department official said: "The implementation of the national emission standards for emission limits in particular, help to further strict management of our province pollution, reduce pollutant emissions, to further improve air quality, but also help promote environmental protection in Yangtze River Delta standard integration. "

Gas-fired steam 8 ton horizontal boiler safety valve from installation to use, it must remain vigilant safety valve is one of the most important components of the gas steam boilers, boiler probability of the risk occurring due to various incidents can effectively suppressed. This article focuses on the safety valve from installation to use several important considerations, we do not ignore the use of gas when it steam boiler. A Notes 1 safety valve, the safety valve should be mounted vertically in a high position in the pot business, set box. 2, between the safety valve and the drum or header, not equipped with access to the steam outlet pipe and the valve. 3, the lever-type safety valve should prevent movement of the self-apparatus and the weight limit leverage deviant guide tube, a spring safety valve should lift and handle means for preventing movement of the adjustment screw is screwed lightly. 4, the rated steam pressure less than or equal to 3.82MPa gas steam boiler safety valve throat diameter of not less than 25mm; power greater than the rated steam pressure 3.82MPa boiler safety valve throat diameter not less than 20mm. 5, the safety valve and coal-fired steam boiler tubes, the cross-sectional area not less than the cross-sectional area of ​​the valve inlet. If several valves installed together with a short tube directly connected to the drum, the cross-sectional area of ​​the passage should not step short tube to 1.25 times the area of ​​all the exhaust valve. 6, the safety valve should normally be installed exhaust pipe, exhaust pipe should be through a safe place, and there is sufficient cross-sectional area to ensure the smooth flow of exhaust. 7, the safety valve exhaust pipe at the bottom should have received a place of safety posturing of drainage pipe, the exhaust pipe and drainage pipe not allow the installation of the valve. 8, rated evaporation to 0.5t h coal-fired steam boiler /, at least two safety valves installed; Rated evaporation 0.5t h less than or equal to electric boiler /, mounted on at least a safety valve. 9, separable economizer outlet, the steam superheater outlet valve must be installed.

Free Chat

About Us

Contact Us