In general, the tonnage of the boiler controllable range is very wide, ranging from 0.5 to 150 tons, a pressure between 1.0-2.0MPa, can achieve high operating temperature of 224 deg.] C, the amount of steam produced is also very impressive, 0.5 -150 tons, suitable for high temperature requirements for steam production and industry.
AMD Power were to buy 10 tons of steam and one 4 tons of steam condensing 750kgh diesel steam boiler fuel gas from the company for cell processing company production and construction. From the analysis of the demand to the boiler factory, by the company solely responsible for AMD Power fully demonstrated the company's confidence in me, the smooth progress of bilateral cooperation.
Way to get hot water boiler condensate and water ways: boiler hot water boiler, we believe it is not strange, because it is one of the products box boiler, so in front, has already begun in this area study and work, so that we can to become familiar with and understand. So, the next will continue this topic in order to advance their learning process, and at the same time, we also benefit from some of the harvest and progress. 1. The condensed water in the hot water boiler, which can be obtained by way? Hot water boiler condensate obtained pathway thereof, are mainly the following, are as follows: a way: When the work turbine, exhaust steam enters the condenser and after cooling, the steam becomes condensate. Two ways: by heating systems fed out steam condensate recovered qualified. Three ways: through chemical water system to provide make-up water.
Note industrial boiler water quality testing of water quality testing what are the considerations which industrial boilers (1) pay attention to scaling problems boiler. When carrying out inspections of the boiler water quality, pay attention to the problem of scale boilers. Boiler heating surface scaling, will not only affect the thermal conductivity of the boiler, but also can disrupt the normal structure of the boiler, affecting the normal operation of the boiler. Fouling will too concentrated so that the temperature of the steel sheet, the steel sheet could afford once over, will produce accidents. Moreover, the scale problem is a common cause of boiler accident, we need to attach great importance to staff fouling problems, do water quality testing. (2) pay attention to water treatment and work-related training of personnel. First, we must strengthen the progress of the work of the boiler water treatment, understand the importance of water treatment. Second, we must strengthen the training of staff so that it can fully understand the water treatment process. To make it have the necessary knowledge of water treatment. In particular, to strengthen the natural water, the impurities in the water for effective treatment to improve water quality. To pay attention when handling method, common in two ways, first, filtration, and second precipitation. In personnel training, to ensure that staff can master the common water quality testing methods and treatment, to master the professional knowledge, and constantly improve the quality of personnel. First, to ensure accurate test results of water quality, so as to smoothly guide the follow-up by the correct data. Second, we must strengthen the technical quality of the staff increase, so do the theory with practice. Third, the development of sound, a sound regulatory framework, the rule-based quality inspection can reduce boiler performance problems caused by poor water quality. (3) prevent boiler corrosion problems. Boiler corrosion problems need attention, which need to focus on sensitive monitoring of the boiler, the weak link in the water quality testing, monitoring whether it is corrosive. If the monitoring to corrosive media, to fully, completely clear. Taking into account the protection of the cold parts of the corrosion-prone parts of timely protection, corrosion has been the site for processing, so that you can effectively avoid the boiler cause further corrosion. (4) strengthen the supervision of water treatment. To further strengthen the supervision of the water treatment process, so as to improve the performance of the boiler, saving operating costs, reduce the occurrence of accidents. First of all, to supervise water quality around the normal operation of the boiler, to avoid adverse water quality. Second, we must strictly examine the quality of treated water in accordance with the relevant requirements, the supervision carried out, to achieve the quality supervision and inspection of the entire process. Only strengthen supervision, the implementation of routine inspections in order to truly improve the effectiveness of water quality tests.Free Chat
Copyright © 2020.Company name All rights reserved.