Steam Output And Coal Fired Fuel Steam Boiler

Steam Output And Coal Fired Fuel Steam Boiler

Coal-fired steam output and coal fired fuel steam boiler auxiliary equipment which is the result of burning coal-fired steam boiler fuel coal fired boilers to provide steam for industrial production, with the rapid development of the national industrial production, market demand for coal-fired steam boiler gradually increased, boiler in addition to the main components, further include other auxiliary devices, such as coal feeder, induced draft fan and the like. As a supporting auxiliary equipment coal-fired steam boilers, related to an important indicator of whether the normal operation of the boiler, auxiliary equipment and its role following is a small series of analyzes and summarizes the coal-fired steam boiler: 1, fuel supply equipment: Storage and transportation fuels. 2, coal grinding and milling equipment: Pulverized coal milled to a pulverized coal burning and enter the combustion boiler combustion apparatus. 3, the wind blowing apparatus: the air blowing device is defined by the air into the blower means exports coal furnace air preheater after heating and milling. Blower device refers to the boiler flue gas discharged from the chimney draft fan and sent to atmosphere. 4, water supply equipment: water through the water treatment device processing into fired steam from the feed pump. 5, slag, dust removal equipment: Cleaner Equipment refers to the removal of ash from the boiler and carry away equipment, dust removal equipment refers to the removal of fly ash in the boiler flue gas, improved sanitation. 6, the automatic control device: automatic detection, process control, automatic protection and automatic adjustment. Advanced coal-fired steam boiler in a programmable logic controller (PLC) is the central processor of the control system. The control system via the touch screen operation, the boiler automatic control and degree of operational reliability is greatly improved, easier to use and intuitive.

Horizontal steam output and coal fired fuel steam boiler accident treatment method: 1 overpressure accident boiler, boiler overpressure phenomenon of (1) a sharp rise in steam pressure, the pressure exceeds the allowable working pressure gauge pointer over the "red line" safety valve operating pressure is still elevated. (2) the operation of the device is the interlock overpressure protection, should send overpressure alarm signal, stops the air blowing, the wind, coal. (3) steam temperature and steam flow rate reduction increases. 2, to treat boiler overpressure (1) weakened rapidly burning, manually open the valve or bleed valve. (2) increase the water supply, while the lower reinforcing blowdown drum (It should be noted at this time to maintain the normal water level of the boiler), in order to reduce the temperature of the boiler water, thereby reducing the pressure in the boiler drum. (3) as a safety valve malfunction or all of the pressure gauge damage, emergency shutdown, safety valves and pressure gauges are to be repaired after the boost operation. When endanger the safe operation of (4) Boiler excessive pressure, blood pressure should take measures, but too fast buck is strictly prohibited. (5) boiler overpressure eliminate serious, to the shutdown of the boiler internal and external inspection, to eliminate the overpressure caused by deformation, leakage and other safety accessories and maintenance unqualified. 1, the phenomenon of the boiler water (1) below the minimum safe water level line, or no visible water, the water table glass (plate) as a white. (2) as a full-color water level gauge vapor instruction color. Low water level alarm signal (3) water level alarm occurs. (4) low water interlocking means, the water level should be below a prescribed value blower, Fan, grate reduction motor stops running. (5) a sharp rise in the superheater steam temperature, higher than the outlet steam temperature. (6) boiler exhaust gas temperature rises. (7) the water flow is less than the steam flow, causing Should the water tube due to tube cracking or economizer, an opposite phenomenon occurs. (8) When a serious water shortage, can smell the burnt smell. (9) When a serious shortage, the door can be seen from the red-hot waterwall tubes. (10) a serious water shortage, the furnace tube may rupture, then can hear the explosions, smoke and steam from the door, watching spray the fire door.

Hefei Limin Pharmaceutical Co., Ltd. Nanjing Military Region, formerly the backbone of pharmaceutical companies, the main drug is slowly swallow rather teabag, relying on advanced R & D platform to carry out contract manufacturing, OEM OEM and other business cooperation. China's environmental protection development trend began to take shape, many environmental policies have been put forward for a positive response to the national environmental policy, Limin Pharmaceutical decided to introduce a gas station steam output and coal fired fuel steam boilers. After an investigation of the boiler market, Limin Pharmaceutical fast boiler is strong comprehensive strength and wealth of experience working for many years in the pharmaceutical industry to attract, party fast according to the actual needs of customers for its recommendation of one of Taiwan 4 tons of steam condensate gas-fired steam boiler (WNS4-1.25-YQ).

What is the principle of the boiler? No matter how much the tonnage, the boiler works basically the same. Role of the boiler fuel chemical energy is converted into thermal energy, heating and heat inside the pot with water to become superheated steam having a mass and a sufficient amount (steam temperature, steam pressure) of the steam turbine for use. Now the power plant boiler capacity, high parameters, technical complexity, high levels of mechanization and automation, the main fuel is coal, and coal prior to combustion of pulverized coal first made, and then into the boiler combustion heat release in the furnace. Broadly speaking, the work process is the main boiler fuel combustion, heat transfer, vaporization and heating of the water with the superheated steam and the like. The entire boiler boiler composed of two parts and auxiliary equipment. Boiler: boiler body is the main part of the boiler equipment, is composed of two parts, "pot" and "furnace" composition. "Pot" is the soda system which main task is to attract the heat receiving fuel discharged, the water is heated, evaporated and finally becomes superheated steam having certain parameters. It consists economizer, the drum, the downcomer, the header, water wall, superheater and reheater connecting pipes and other equipment and valves. 1) economizer. Vertically positioned rear of the boiler flue, the use of flue gas waste heat boiler feed water, reducing the exhaust gas temperature, increase boiler efficiency, fuel economy (2) drum. At the top of the boiler, it is a cylindrical pressure vessel, which is under water, the upper portion of the steam is that it accepts the economizer runoff, while the downcomer composed header, Wall water circulation circuit. Wall water absorbs heat generated in the soda mixture was collected in the drum, conveyed by the saturated steam to the superheater steam-water separator (3) downcomer. Water supply pipe water wall, the effect of which is introduced into the water in the steam drum to the lower header redistribution respective waterwall tubes. Dispersion in small diameter and the large diameter downcomers Downcomer two kinds. Small diameter tubular small diameter drops, the water cycle of negative (4) waterwall lower header. The main role of the header is a mass pooled or working fluid through the header to the header redistributed through other conduits. A water wall is thicker lower header tube closed at both ends, its role is connected to the downcomer and the water-cooled wall, so as to function together, mixing, redistribution effect working medium (5) water wall. At the furnace around its main task is to absorb radiant heat of the oven, to evaporate water, which is the main heating surface modern boilers, while protecting the furnace wall (6) superheater. Its role is to drum saturated steam into superheated steam on heating (7) having a predetermined temperature reheater. Its role is done in the steam turbine power section is heated up again, and then continue to work in the steam turbine. "Furnace" is the combustion system, its task is to make the fuel burn in a good furnace, heat. It consists of the furnace, the burner, ignition means, air preheater, the smoke duct and the furnace wall, frame and other components. (1) furnace. It is transferred from the furnace wall and into the water wall for fuel combustion, the fuel combustion in suspension, the release of large amounts of heat within the space. (2) burners. Located on the furnace walls or corners, its role is the fuel and air injected into the furnace at a constant speed, so that it can be well mixed in a furnace in order to ensure timely ignition and rapid and complete fuel combustion. DC sub-burner and swirl burner two basic types. (3) air preheater. Located in the boiler backpass, whose role is to use waste heat of flue gas to heat the fuel required for the combustion air, exhaust gas temperature can be further reduced not only, but also for strengthening the furnace combustion, improve the economy of combustion, pulverized coal drying and conveying is advantageous of. Boiler efficiency can be increased by 2%. And rotary two kinds of charge. (4) smoke duct. From the furnace wall is a pipe, the pipe heating surface and the portion of the tube wall and other components of the package, for guiding the flow of flue gas through the heat exchanger and the respective heating surface, and is divided into horizontal flue backpass. Auxiliary ventilation apparatus comprises auxiliary equipment (delivery, induced draft fan), a fuel transportation equipment, milling system, in addition to ash and dust removal equipment, desulfurization equipment.

Free Chat

About Us

Contact Us