10Ton Heavy Oil Fired Boiler

10Ton Heavy Oil Fired Boiler

We learned from Zhenjiang Municipal Environmental Protection Bureau, to further promote the Battle of Blue Sky, enhance air quality, the city actively carry out biomass 10ton fired boiler investigation and remediation work has been completed seven bathrooms demolition of straw biomass boiler work in built-up urban area .

Biomass boiler pollution remediation has been a major focus of air pollution control, some of the city bathhouses, hotels, restaurants in the use of raw materials process boilers, illegally blended with coal, waste wood, waste and other substances, not advanced treatment of smoke, nitrogen oxides and other pollutants directly into the atmosphere, some impact on air quality.

According to relevant regulations, Zhenjiang city, the city built the region prohibited the use of straw biomass boilers, the current investigation and the bathroom were 10 straw biomass boiler, in which 7 have been removed, two shutdown ready transformation. At the same time, straw biomass boiler outside the urban area will be completed before the end of June classification renovation work, all dedicated boiler using biomass briquette students, prohibit blended with other fuels, coal, wood, etc., and must complete the construction of the bag efficient dust embodiments, emissions guarantee compliance.

Classification is the use of fuel oil-fired 10ton fired boiler and practical, this boiler is the boiler variety of diesel fuel and waste oil, his overall construction and arrangement of the gas boiler is similar to a common classification of mechanical and steam materialized style.

Acceptance of low nitrogen renovation project management approach gas-fired 10ton fired boilers in order to successfully carry out the transformation of the company low-nitrogen, low nitrogen transformation and acceptance process will now be regulated in response to acceptance of work under different circumstances, thus does not affect the progress of the company's overall transformation of low-nitrogen, It is organized as follows. The company low-nitrogen transformation acceptance criteria refer to "Beijing Gas (oil) boiler low nitrogen transformation Yijiangdaibu fund management approach" in low-nitrogen transformation acceptance requirements, low nitrogen transformation of the company and the manufacturers signed contracts for acceptance, and a phased acceptance carried out the way, it is divided into the following four stages: prior to acceptance confirmation from the manufacturer, pre-acceptance, government low nitrogen transformation and acceptance, final completion and acceptance. First, the low nitrogen gas boiler renovation project before pre-acceptance confirmation from the manufacturer to achieve the requirements of the contract 1. The actual standard for this type of project, the next step is direct acceptance process. 2. The actual contract can not reach the required standard (manufacturers to lower the acceptance criteria) for such projects, communication with the manufacturers of xx, re-sign a supplementary agreement or contract, according to a new contract or acceptance protocol standards. 3. The actual contract not up to the required standard (manufacturers do not agree or do not allow the government to reduce the acceptance criteria) for such projects, communication by the xx with the manufacturers, to terminate the contract, non-acceptance. Second, a low nitrogen gas boiler renovation project pre-acceptance satisfy items (1 projects above) pre-acceptance required to start the pre-acceptance operates in the following claims. 1.xx after the company confirmed that manufacturers have reached the standard contract, the company launched an internal pre-acceptance, and notify the relevant Division, Center for Technology Management, Operations Management Center attended. 2. Pre-acceptance of the project can be divided into environmental inspection and acceptance of two parts, the project must meet the acceptance requirements of environmental protection (standards and materials), to enter the next "low nitrogen transformation of government acceptance" stage. Unqualified acceptance content, fill out the on-site rectification notice, rectification, manufacturers, construction units, divisions, technical, operational and other relevant units to sign it by the deadline. 3. If the project environmental impact there is acceptance, boiler and other major security issues, not by pre-acceptance; In addition, pre-acceptance by the environmental protection, engineering, pre-acceptance deadline for correction. 4. In response to these contents rectification notice, by the manufacturer or xx arrange the construction unit to develop corrective plan submitted to the relevant divisions, technical, operational management center knows, in order to determine the final acceptance plan. Third, the low nitrogen gas boiler renovation project government low-nitrogen transformation project through the pre-acceptance and acceptance of environmental protection, and acceptance by the Government Division organized low-nitrogen transformation inspection department, relevant content is organized as follows. 1. A low nitrogen acceptance by the division of the transformation EPA invited, and notifies the acceptance time OA xx, center management technology, operation and management center. 2. The notification by the equipment manufacturers xx company to deal with the EPA project acceptance. 3. Technology Management Center, operation and management center according to the situation, coordination, cooperation division of the Environmental Protection Agency to complete the inspection. 4. acceptance by EPA, proceed to "completion and acceptance of the final" stage. 5. If the EPA does not pass inspection, subject to the opinion of the EPA, the Environmental Protection Agency if given a second chance acceptance, arrange for rectification by the Environmental Protection Agency xx grasp, and to give the exact time of commissioning compliance, and older than the Environmental Protection Agency to give the second acceptance time more than 3 days; EPA if not given a second chance of acceptance, the acceptance consequences borne by the manufacturer and by the execution of the contract with reference to the subsequent procedure. Fourth, low nitrogen gas boiler renovation project completed after final completion and acceptance 1. EPA acceptance, notify the manufacturer xx by the company, the construction unit to start the rectification work. Factory or construction unit for rectification according to plan in accordance with the rectification notice requirements. 2. The respective divisions, technical management center, operation and management of the center to collaborate rectification work, with supervision. 3. After the completion of the rectification project, organized by the xx-related divisions, technical management center, operation and management center participate, final completion and acceptance, to complete the transfer.

The main components of the gas 10ton fired boiler burner gas boiler constructed by the following five systems: 1, the function that the air supply system, air supply system into the wind speed a certain amount of air to the combustion chamber, its main components are: a housing, the fan motor, fan impeller, air guns fire tube, damper controller, damper baffle, a cam adjusting mechanism diffuser plate. 2, the ignition system functions in that the ignition system ignites a mixture of air and fuel, its main components are: the ignition transformer, the ignition electrode, a high voltage electrical cable fire. A more secure electronic ignition system called ignition pulse, is widely used Zhuoyi energy saving gas boiler manufacturers. Which facilitate saving, can simply press a finger, and safe, does not occur due to unexpected accidents occur flame, once the stall state occurs, the control system can close the solenoid valve, off the gas passage. 3, system monitoring function monitoring system is to ensure that the burner safe and stable operation, the main components are flame detectors, pressure monitor, temperature monitor (see below) and the like. 4, functions of the fuel system of the fuel system is to ensure that the desired fuel burner. The fuel oil burner system are: tubing and fittings, pumps, solenoid valves, nozzles, heavy oil preheater. The gas burner mainly a filter, pressure regulator, solenoid valve, and then firing solenoid valve, the fuel valve. 5, electronic control system electronic control system command center and the focal the above system, the primary control element is a control box, with different programmer for different burners, the common programmer has: LFL series, the LAL series, LOA series, LGB series, the main difference is the time of each different program steps. Hebei gas boiler controller 1, ultra-Daquan Chinese LCD display, built-in incandescent night light, both during the day and night, the screen is clearly visible. 2, the image level animation display state, condition, valve status, alarm status, operation of the boiler at a glance. 3, CPU intelligent central processor, all the programs focused on a digital chip, scalability, high degree of automation, simple, and powerful. 4, includes a time setting, temperature setting, setting valve, a continuous setting, timer setting, and other control functions pressure setting, arbitrarily set the working state. 5, includes a low level alarm (anti-dry function), ultra high temperature alarm, alarm and other ultra-high pressure alarm and chain protection (shutdown), eliminate safety hazards. 6, to facilitate detailed self-diagnosis, records, checks and maintenance.

Free Chat

About Us

Contact Us